Industrial steam engineering across Bangladesh
Specify a new boiler, source a critical spare or dispatch a certified engineer — one team from site survey to annual inspection.
Companies we work with
Licensed and certified
Registered with the Office of the Chief Inspector of Boilers, working to the Boiler Act 1923.
Nationwide coverage
Dhaka, Gazipur, Savar, Narayanganj, Cumilla and Chattogram.
Breakdown response
On-call teams for burner lockouts, feed pump failures, tube leaks and steam leaks.
Parts held in stock
Burners, flame sensors, safety valves, traps, gaskets and feed pumps from our Dhaka store.
01Equipment
Fire tube, water tube, biomass and heat recovery units, sized from your measured steam demand and the fuel you can actually get.
High-efficiency three-pass wetback horizontal fire tube industrial steam boiler with monoblock burner and side steam manifolds.
02Spare parts
38 line items across 8 categories, held in our Dhaka store or sourced direct from the original manufacturer.
Supply, installation, certification and service stay connected from first firing onward.
03Service
One team for annual certification, planned shutdown work, water treatment and emergency call-out.
04Industries
Pressure, dryness and fuel choice change with the plant, so each system is specified around the machines it feeds.
Steady header pressure for stenters, jet dyeing vessels, hydro extractors and compactors, sized so simultaneous batch fills do not cause a drop.
Utility steam for water for injection stills, autoclave sterilisation, reactor jackets and cleanroom humidity control.
Process heat for pasteurisers, jacketed kettles, clean-in-place sanitation on bottling lines and edible oil refining.
High temperature supply for single facers, double backers, corrugating rolls and drying cylinders under fast speed changes.
Headers for jacketed reactors, distillation columns, reboilers and steam tracing, with pressure reducing stations at each stage.
Biomass, husk or gas fired units for parboiling tanks, pellet conditioner steam injection and rotary grain dryers.
05Process
From the first site visit to certification and handover, with the same engineers throughout.
We record normal and peak demand in kg/hr, working pressure, available fuel, feedwater chemistry and the space the boiler house has.
Capacity, burner modulation, deaerator, blowdown recovery, safety valves, chimney and pipe routing are drawn up as one package.
Certified welders run the steam piping and flue stack. We complete first firing, combustion tuning and full load testing.
We arrange the statutory hydraulic inspection, train your operators and stay on call once the plant is running.
06Questions
Practical answers for factory owners, utility managers and chief engineers.
Dyeing lines swing hard when several machines fill at once, so nameplate figures are not enough. We run an on-site steam survey to measure peak against average consumption in kg/hr, the working pressure (usually 6 to 10 bar) and how much condensate returns, then size the boiler and accumulator from those readings.
Every steam boiler must be inspected and certified each year under the Boiler Act 1923. That includes a hydraulic test at 1.5 times design pressure and a valid certificate from the Office of the Chief Inspector of Boilers. We carry out the testing, prepare the documents and handle the renewal.
We keep engineering teams and stocked service vans for Gazipur, Savar, Ashulia, Narayanganj and Chattogram, so a burner lockout, feed pump failure or tube leak is usually attended the same day. Call the breakdown line and an engineer will talk through the fault while a team is dispatched.
Yes. We supply and install dual fuel monoblock burners, gas train valves and biomass or coal feeding retrofits. Every conversion includes draft fan adjustment, refractory modification and the safety approvals needed before the boiler returns to service.
Groundwater across Bangladesh carries high calcium and magnesium hardness along with dissolved oxygen. Without softening and oxygen scavenging, scale builds on the tubes within months, which drives up fuel use, overheats the metal and eventually splits tubes.
Our Dhaka store carries burners, UV flame scanners, sequence controllers, gas multibloc valves, vertical multistage feed pumps, spring loaded safety valves, thermodynamic steam traps, spiral wound gaskets and seamless carbon steel boiler tubes.
07Contact
Send your steam demand in kg/hr, working pressure in bar and the fuel available. An engineer replies with sizing and pricing.
