Common industrial boiler questions

Dyeing lines swing hard when several machines fill at once, so nameplate figures are not enough. We run an on-site steam survey to measure peak against average consumption in kg/hr, the working pressure (usually 6 to 10 bar) and how much condensate returns, then size the boiler and accumulator from those readings.

Every steam boiler must be inspected and certified each year under the Boiler Act 1923. That includes a hydraulic test at 1.5 times design pressure and a valid certificate from the Office of the Chief Inspector of Boilers. We carry out the testing, prepare the documents and handle the renewal.

We keep engineering teams and stocked service vans for Gazipur, Savar, Ashulia, Narayanganj and Chattogram, so a burner lockout, feed pump failure or tube leak is usually attended the same day. Call the breakdown line and an engineer will talk through the fault while a team is dispatched.

Yes. We supply and install dual fuel monoblock burners, gas train valves and biomass or coal feeding retrofits. Every conversion includes draft fan adjustment, refractory modification and the safety approvals needed before the boiler returns to service.

Groundwater across Bangladesh carries high calcium and magnesium hardness along with dissolved oxygen. Without softening and oxygen scavenging, scale builds on the tubes within months, which drives up fuel use, overheats the metal and eventually splits tubes.

Our store carries burners, UV flame scanners, sequence controllers, gas multibloc valves, vertical multistage feed pumps, spring loaded safety valves, thermodynamic steam traps, spiral wound gaskets and seamless carbon steel boiler tubes.

Yes. We are listed as a Boiler Repairer Organisation on the Office of the Chief Inspector of Boilers' public register, under the Boiler Act 1923. You do not need to take our word for it — search the register at boiler.gov.bd and check for MK Boiler Solution directly.