Boiler services
Boiler feedwater treatment and dosing support
Match softening, dosing and blowdown to the actual make-up water and condensate return—not a fixed chemical recipe.
Treat the water before it becomes a tube problem
Hardness, dissolved gases, suspended matter and poor chemical control can show up later as scale, pitting, carryover or repeated tube failure. The useful starting point is the current water result, the boiler duty and what proportion of condensate returns.
We review the feedwater route from raw-water treatment through the tank, pumps, dosing and blowdown points, then scope equipment or maintenance work around the operating condition found on site.
- System
- Softener, tank, pumps, dosing and blowdown
- Inputs
- Water results and operating duty
- Goal
- Control scale and corrosion risk
Boiler services
Feedwater support scope
- Raw, softened, feed and boiler-water sampling plan review
- Softener operation and resin-condition checks
- Dosing-pump duty, calibration and injection-point review
- Feed tank, make-up and condensate-return assessment
- Blowdown practice and available control-equipment review
- Pump, resin and dosing-equipment supply against the duty
01 — 04
Water-side review
- 01
Sample
Available water results and sampling points are reviewed against how the plant actually operates.
- 02
Trace
The route from raw water to the boiler is checked for bypasses, poor regeneration, dosing or return issues.
- 03
Correct
Maintenance, settings, consumables or equipment changes are prioritised by risk and operating impact.
- 04
Monitor
The plant team receives practical check points for verifying that the treatment stays under control.
06Questions
Common questions
Practical answers for factory owners, utility managers and chief engineers.